229-234
Research, Design, Calculations, and Operating Experience Chemical and Petroleum-Gas Equipment
Processes for sulfur recovery, regeneration of spent acid, and reduction of nox emissions
J. Kr. Laursen and A. N. Karavanov
235-240
Thermal and aerodynamic characteristics of banks of bimetallic finned tubes manufactured by the Oktyabr’skkhimmash plant
A. É. Piir, S. P. Roshchin, V. B. Kuntysh, A. N. Bessonnyi and A. Sh. Minnigaleyev, et al.
241-243
Procedure for design analysis of a tube furnace
D. G. Filatov, A. A. Kazenov and V. S. Karpov
244-247
Water-jet stations for single-pipe transport of oil-well production
V. M. Pestov, G. N. Matveev, A. S. Ipanov and A. S. Kharin
248-254
Characteristic design features of reactive distillation columns for ethylene glycol production
N. A. Samoilov, I. A. Mnushkin and O. A. Mnushkina
255-259
Furnaces with a refractory-concrete lining
D. E. Denisov and A. B. Zhidkov
260-263
Cryogenic Engineering, Production and Use of Industrial Gases, Refrigeration Engineering
New designs of heat exchangers for natural gas liquefying and separating plants
O. K. Krasnikova, O. M. Popov and V. N. Udut
264-272
Compressors, Pumps, and Pipeline Fittings
State and prospects of development of modular hydrocarbon gas compressing plants having a 6.3 MW gas turbine drive
Yu. S. Bukholdin, V. P. Parafeinik, V. N. Dovzhenko and V. S. Korolev
273-277
Reverse flows in pumps and axial vortex stage characteristic calculation
B. N. Zotov
278-281
Industrial Ecology
Simulating aerodynamics processes in a biofilter
P. Baltrenas and A. Zagorskis
282-290
Materials Science and Corrosion Protection
Fine-crack mechanics in fatigue calculations. Part 1. Fatigue resistance in smooth steel specimens in tension-compression
G. M. Khazhinskii
293-298
Research, Design, Calculations, and Operating Experience Chemical and Petroleum-Gas Equipment
Isothermal flow of anomalously viscous liquids in helix seals with longitudinal circulation
V. I. Yankov, N. M. Trufanova and A. G. Shcherbinin
299-302
Knurling-a method of stabilizing the flow of polymeric melts in channels of rheologic devices and processing machinery
F. A. Kougiya
303-306
Separation of water-alcohol mixtures by pervaporation on composite polar-2 and MDK-P membranes
A. S. Timonin, S. A. Trifonov and A. N. Burlinov
307-310
Experience with modernization of drum granulator dryers in mineral-fertilizer production
I. G. Grishaev
311-314
Regular metallic packing for heat-and mass-exchange processes with direct phase contact
A. S. Ryabushenko, A. S. Pushnov and M. G. Berengarten
315-319
Cryogenic Engineering, Production and Use Of Industrial Gases, Refrigeration Engineering
Boiling characteristics of a cryogenic liquid subject to pressure reduction in a vessel
S. P. Gorbachev
320-326
Compressors, Pumps, and Pipeline Fittings
Methods of rotating stall and surge detection in centrifugal compressors
Ya. Z. Guzel’baev, A. L. Khavkin and I. G. Khisameev
327-331
Industrial Ecology
A method of determining aerodynamic parameters of cyclone separators from the geometrical parameters of the inlet and outlet pipes
V. A. Lazarev
332-338
Optimal control of the effects from industrial transportation on the environment
N. I. Nikolaikin, E. Yu. Barzilovich and N. E. Nikolaikina
339-344
Safety, Diagnosis, and Repair
The potential damage zone concept and risk analysis for complicated technical systems
A. M. Lepikhin
345-348
Diagnosis of pipes having thermal fatigue cracks
A. V. Sudakov and A. V. Polupan