521-525
Research, Design, Calculations, and Operating Experience
Processes and equipment for chemical and oil-gas production
Investigation and analysis of a new generation of straight-through centrifugal separation elements
A. G. Zibert and G. K. Zibert
526-531
Hydrodynamic operating regimes for a combined heat-and-mass exchanger
A. E. Ivanov, M. G. Berengarten and M. I. Klyushenkova
532-536
Study of thermal decomposition during preparation of ferrite powders by cryochemical technology
V. I. Gulevich
537-541
Analysis of basic parameters of radial types of pulsed rotary equipment
M. A. Promtov
542-547
Utilization of decomposition gases in atmospheric-vacuum tubestill units
A. B. Zhidkov, E. A. Khukhrin, K. K. Tupitsyn and P. V. Kozlov
548-553
Engineering and Technology for Processing Natural Fuels
Advanced technology for complete processing of solid hydrocarbons
A. N. Bulkatov and E. M. Movsum-zade
554-557
Combustion of water and coal suspension fuels of low-metamorphized coals
M. P. Baranova, T. A. Kulagina and S. V. Lebedev
558-561
Cryogenic Engineering, Production and use of Industrial Gases, Vacuum Engineering
Dependence of equilibrium xenon and krypton absorption in oil on temperature
A. V. Potapov and I. A. Arkharov
562-565
Compressors, Pumps, and Pipeline Fittings
Comprehensive assessment of durability of fireproof materials under gas-pumping equipment operation conditions
G. I. Shaidurova, I. L. Vasil’ev, Ya. S. Shevyakov, N. V. Ul’yanova and A. G. Ivanova
566-569
Calculation of characteristics of variable-pitch worm
B. N. Zotov
570-576
Calculating leaks in rotor-machine radial slot seals. Part 1. Method based on calculated and empirical local pressure loss coefficients
V. A. Mel’nik
577-579
Industrial Ecology
Drum incinerator for the thermal destruction of muddy effluent sediments
D. I. Kofman, M. M. Vostrikov and A. V. Antonenko
580-584
Removing heavy-metal ions from effluents by means of sorbent formed from wood-working and agribusiness wastes
N. A. Sobgaida, L. N. Ol’shanskaya and Yu. A. Makarova
585-587
Safety, Diagnosis, and Repair
Preventing atmospheric column deformation during installation
V. V. Ivanov, A. P. Osipenko, A. V. Lazarev and V. V. Kachanov
591-595
Research, Design, Calculations, and Operating Experience
Profile analysis of blades in a vortical mass-exchange vessel with porous rotating sprayers
A. V. Dmitriev and N. A. Nikolaev
596-602
Hydrodynamics and heat and mass exchange in a centrifugal-bubbling vessel
V. S. Kalekin, D. V. Kalekin, V. D. Bakulina, S. N. Kapanin and A. L. Leonov, et al.
603-608
Method of solving problems of flow past a cascade of supercavitating blades in hydrodynamic reactors
D. S. Likhachev and L. V. Kulagina
609-611
Hot-molding processes for the preparation of ferrites by the cryochemical method
V. I. Gulevich
612-618
Engineering and Technology for Processing Natural Fuels
Gasification of coals, combustible shales, and other types of organic fuel
A. N. Bulkatov, E. M. Movsum-zade and V. V. Myasoedova
619-620
Cryogenic Engineering, Production and Use of Industrial Gases, Vacuum Engineering
International scientific conference “Industrial Gases”
L. N. Anokhina
621-623
Problem of cold accumulation as a matter of energy saving and optimization of energy consumption
A. M. Arkharov, A. I. Leont’ev, V. V. Sychev, I. A. Arkharov and E. N. Krizhanovskaya, et al.
624
Rectification technology for preparing especially pure cryogenic products
E. I. Borzenko, L. A. Akulov and A. V. Zaitsev
625-626
Experimental study of separation processes on packed columns
V. L. Bondarenko, T. V. D’yachenko, O. V. D’yachenko and Yu. M. Simonenko
627-628
Study of neon solubility in liquid nitrogen
V. L. Bondarenko, A. V. Trotsenko and A. V. Valyakina
629-630
Study of vapor–liquid equilibrium of mixtures in the field of dilute solutions
A. M. Arkharov, M. Yu. Savinov, V. E. Poznyak and M. Yu. Kolpakov
631-632
Use of industrial gases in medicine and sport
A. V. Butorina, V. A. Matveev and A. M. Arkharov
633
Use of xenon in medicine
V. N. Potapov and I. P. Kolesova
634-635
Study of equilibrium absorption of inert gases in water-emulsion solvents in relation to their fat content
A. V. Potapov, I. A. Arkharov and A. A. Aleksandrov
636-637
The Hartmann–Shprenger effect in the installation of preliminary purification of a neon–helium mixture
V. L. Bondarenko, S. A. Koshevoi and S. I. Gridnev
638-639
Choice of the optimum absorber regeneration temperature for purifying a neon–helium mixture
V. L. Bondarenko, S. Yu. Vigurzhinskaya and M. Yu. Merkulov
640
Cleaning system for corrosive gases and hydrogen
A. L. Gusev
641-642
Creation of axial expanders on magnetic supports for natural gas
V. A. Khetagurov and K. K. Sokolov
643-648
Compressors, Pumps, and Pipeline Fittings
Repairing and extending life of replacement steel parts of high-pressure oil and gas drilling pumps
E. Kh. Isakaev, V. B. Mordynskii, A. S. Tyuftyaev, Yu. M. Avilkin and V. A. Katarzhis
649-652
Development of antifriction coats for sliding bearings of compressors
L. I. Simma
653-656
Computerizing Calculations and Designing
A three-dimensional simulation method for spiral pipelines
V. G. Chebykin
657-661
Complementary Products and Devices
A comparison of automatic instruments for oil-product fractional composition determination
G. N. Abaev, A. V. Dubrovskii and R. G. Abaev
662-666
Industrial Ecology
Dusty gas flow mechanism in dust-trap distributors for making building materials
I. A. Chugunova, Yu. V. Krasovitskii, E. V. Romanyuk, R. A. Vazhinskii and M. N. Fedorova
667-669
Manufacturing Technology
An automatic process control for rolling tubes in tube assemblies
S. A. Sheinbaum