3035-3047
Review
Recent developments in the weldability of lithium-containing aluminium alloys
Joseph R. Pickens
3048-3052
Papers
Long-term dissolution rate of nuclear glasses in confined environments: does a residual chemical affinity exist?
J. -C. Petit, M. -C. Magonthier, J. -C. Dran and G. Della Mea
3053-3060
Papers
Fatigue of Al-Li alloys: mechanical properties, microstructure (TEM and SEM) and strain localization
Y. Bréchet, F. Louchet and T. Magnin
3061-3066
Papers
D.c. electrical conduction phenomena between two non-contacting stainless steel fibres in a polycarbonate matrix
B. Bridge, M. J. Folkes and H. Jahankhani
3067-3071
Papers
Physicochemical studies on ZnO-Al2O3 system
M. A. Mousa, E. M. Diefallah, A. A. Abdel Fattah and Z. A. Omran
3072-3078
Papers
Defect microstructure and dehydroxylation mechanism of interstratified phyllosilicates: a TEM study
P. Shen, S. L. Hwang and H. T. Chu
3079-3082
Papers
Technique and apparatus for automatic monitoring of crack propagation along glue lines
E. R. Pankevicius and M. Spicer
3083-3088
Papers
Some properties of nickel-coated carbon fibre-polypropylene composite at microwave frequencies
M. S. Ahmad, M. K. Abdelazeez, A. Zihlif, E. Martuscelli and G. Ragosta, et al.
3089-3095
Papers
The mechanical properties of chalk-filled polypropylene: a preliminary investigation
P. H. Th. Vollenberg and D. Heikens
3096-3100
Papers
The thermal decomposition mechanism of iron(III) hydroxide carbonate to α-Fe2O3
L. Markov, V. Blaskov, D. Klissurski and S. Nikolov
3101-3104
Papers
Production of ultra fine SiC powder from SiC bulk by arc-plasma irradiation under different atmospheres and its application to photocatalysts
Yasufumi Nariki, Yasunobu Inoue and Kohichi Tanaka
3105-3110
Papers
Properties of layered structured PE/PP and PB-1/PP films having ultra-thin layers
A. Jaballah, U. Rieck and J. Petermann
3111-3117
Papers
Glasses from aerogels
J. Phalippou, T. Woignier and M. Prassas
3118-3126
Papers
Glasses from aerogels
T. Woignier, J. Phalippou and M. Prassas
3127-3132
Papers
Thermal conductivity measurements of some glass fibre- and carbon fibre-reinforced plastics
S. D. McIvor, M. I. Darby, G. H. Wostenholm, B. Yates and L. Banfield, et al.
3133-3138
Papers
Thermal evaporation of tin on to softened polystyrene substrates
R. S. Payne, A. Swann and P. J. Mills
3139-3141
Papers
Material surface modification by pulsed ion beam
Z. G. Shen, C. H. Lee, C. Wu, D. Y. Jiang and S. Z. Yang
3142-3148
Papers
Superplasticity in an Ni3Al base alloy with 8wt% Cr
Ashok Choudhury, Amiya K. Mukherjee and Vinod K. Sikka
3149-3154
Papers
Formation of amorphous Al-Cr alloys by mechanical alloying of elemental aluminium and chromium powders
Kojiro F. Kobayashi, Nobuo Tachibana and Paul H. Shingu
3155-3158
Papers
Effect of localized redox equilibria on adhesion between gold and thick-film dielectrics
W. A. Zdaniewski and L. D. Silverman
3159-3161
Papers
Effects of annealing on magnetic properties of Fe78B13Si9
H. Y. Pai, C. H. Lam, S. U. Jen and C. K. Hou
3162-3166
Papers
The effect of hydrostatic pressure on transverse strength of glass and carbon fibre-epoxy composites
T. V. Parry and A. S. Wronski
3167-3172
Papers
Strain rate dependence of iodine-induced stress corrosion cracking of Zircaloy-4 under internal pressurization tests
Woo Seog Ryu, Jai Young Lee, Young Hwan Kang and Ho Chun Suk
3173-3178
Papers
Comparison of nacre with other ceramic composites
A. P. Jackson, J. F. V. Vincent and R. M. Turner
3179-3185
Papers
Simultaneous measurement of contact angles and work of adhesion in metal-ceramic systems by the immersion-emersion technique
I. Rivollet, D. Chatain and N. Eustathopoulos
3186-3190
Papers
Mössbauer spectroscopy and X-ray diffraction of oxide precipitates formed from FeSO4 solution
S. Musić, S. Popović and M. Gotić
3191-3198
Papers
Titanium-base coating on plane silica substrates
R. Hillel, M. P. Berthet, J. Bouix and A. Roche
3199-3202
Papers
Characterization of modified PbTiO3 ceramic particles by statistical treatment of their size distribution
M. L. Calzada, L. Olmo and F. Sandoval
3203-3207
Papers
Effect of fluoride, chloride and carbonate ions introduced by cyclic pH fluctuation on the physico-chemical properties of apatite-based ceramics
A. Krajewski, A. Ravaglioli, N. Roveri, A. Bigi and E. Foresti
3208-3214
Papers
Effect of cobalt oxide on the a.c. conduction mechanism of copper tellurite glasses
M. Suleman Malik and C. A. Hogarth
3215-3220
Papers
Piezoelectricity and microstructures of modified lead titanate ceramics
D. R. Villiers and H. K. Schmid
3221-3228
Papers
An evaluation of the grain-boundary sliding contribution to creep deformation in polycrystalline alumina
A. H. Chokshi
3229-3235
Papers
Solid particle erosion of SiC-Al2OC ceramics
S. Gochnour, J. D. Bright, D. K. Shetty and R. A. Cutler
3236-3240
Papers
Electrical conductivity of ion-exchanged oxide glasses
A. K. Srivastava, S. Roy and D. Chakravorty
3241-3248
Papers
Effect of calcination on characteristics, surface texture and sinterability of chemically prepared barium titanate
N. M. Ghoneim, S. Hanafi and Th. Salem
3249-3254
Papers
Aqueous ferrofluids based on manganese and cobalt ferrites
Francisco Augusto Tourinho, Raymonde Franck and René Massart
3255-3261
Papers
Highly filled particulate composites enhancement of performances by using compound coupling agents
X. D. Yu, M. Malinconico and E. Martuscelli
3262-3268
Papers
Fabrication of YBa2Cu3O7−x bulk superconductor from the powder without reoxygenation
R. E. Anderson, M. J. Sablik, C. I. Nicholls and D. Preciado
3269-3272
Papers
Denture base materials reinforced with glass cloths: bending property and adhesivity
J. Nitanda, H. Matsui, Y. Kasahara, K. Wakasa and M. Yamaki, et al.
3273-3280
Papers
Compatibility between alumina fibres and aluminium
U. Madeleno, H. Liu, T. Shinoda, Y. Mishima and T. Suzuki
3281-3285
Papers
Direct TEM observation of microstructures of the austenitic/carbon steels welded joint
C. Pan, R. Wang, J. Gui and Y. Shi
3286-3290
Papers
Rapidly quenched intermetallic compounds, TiAl and Al3Ti
T. Hanamura, T. Sugai and M. Tanino
3291-3296
Papers
Metallic glass ribbon-reinforced glass-ceramic matrix composites
Rajendra U. Vaidya and K. N. Subramanian
3297-3308
Papers
Preparation and densification of superconducting YBa2Cu3Ox ceramics
Hung C. Ling
3309-3313
Papers
Elastic constants of MoSi2 and WSi2 single crystals
Morihiko Nakamura, Syoujiro Matsumoto and Toshiyuki Hirano
3314-3320
Papers
Mössbauer studies of a-Fe74Co10−xCrxB16 alloys
T. G. Narendrababu, R. Jagannathan, V. N. Murthy, D. Akhtar and P. Subrahmaniam
3321-3326
Papers
Temperature dependence of flexural and torsional elastic constants of two nickel-based superalloys
Dattatraya P. Dandekar and Anthony G. Martin
3327-3332
Papers
Flexural properties and dynamic mechanical properties of glass fibre-epoxy composites
Masaki Kimoto
3333-3337
Papers
Preparation and properties of KNbO3 via the sol-gel method
Azar Nazeri-Eshghi, A. X. Kuang and J. D. Mackenzie
3338-3346
Papers
Synthesis of high-Tc superconducting Bi-Pb Sr-Ca-Cu-O ceramics prepared by an ultrastructure processing via the oxalate route
F. H. Chen, H. S. Koo and T. Y. Tseng
3347-3358
Papers
Weldability of aluminium-lithium alloy 2090 using laser welding
P. A. Molian and T. S. Srivatsan
3359-3367
Papers
The relation of hardness to toughness and retained austenite content in N2-H2-CH4 sintered T6, T15 and T42 high-speed steels
V. Martinez, R. Palma and J. J. Urcola
3368-3374
Papers
Chemical modification of silicone elastomers for optics
Shinzo Kohjiya, Kazuyuki Maeda, Shinzo Yamashita and Yutaka Shibata
3375-3379
Papers
On the phases formation in the calcination process of ZnO varistor
J. P. Mah, J. S. Choi and S. H. Paek
3380-3384
Papers
Crystallization of carbon fibre reinforced polypropylene
João K. Tan, Takeshi Kitano and Tatsuko Hatakeyama
3385-3395
Papers
Structure-property relations in an injection-moulded, rubber-toughened, semicrystalline polyoxymethylene
T. J. Pecorini, R. W. Hertzberg and J. A. Manson
3396-3400
Papers
Recent developments in hypoeutectic Al-Si A-S4G alloy
N. Fat-Halla
3401-3407
Papers
Thermal effects on the mechanical properties of SiC fibre reinforced reaction-bonded silicon nitride matrix composites
R. T. Bhatt and R. E. Phillips
3408-3414
Papers
Stability of sol-gel derived porous silica monolith to solvents
Sumio Sakka and Tatsuhiko Adachi