3015-3019
Preparation and tunable photoluminescence of alloyed CdSxSe1−x nanorods
Chao Yang, Xiaochong Zhou, Longyan Wang, Xike Tian and Yanxin Wang, et al.
3020-3025
Preparation and electrochemical behavior of methylene blue intercalated into layered niobate K4Nb6O17
Xiaobo Zhang, Dongsheng Feng, Meifeng Chen, Zhidan Ding and Zhiwei Tong
3026-3034
The random crack core model for predicting the longitudinal tensile strengths of unidirectional composites
Hui Yuan, Weidong Wen, Haitao Cui and Ying Xu
3035-3042
Modified single fiber fragmentation test procedure to study water degradation of the fiber/matrix interface toughness of glass/vinylester
Felipe A. Ramirez and Leif A. Carlsson
3043-3048
Density of states effective mass of SnBi4Se7 deduced from the temperature dependence of electrical conductivity in the activation regime
S. A. Ahmed and S. H. Mohamed
3049-3056
Effects of samarium on microstructure and mechanical properties of Mg–Y–Sm–Zr alloys during thermo-mechanical treatments
Daquan Li, Qudong Wang and Wenjiang Ding
3057-3060
Influence of the austenitic rolling temperature on the microstructure of a TRIP steel before intercritical annealing
C. N. dos Santos, A. G. Vieira, A. S. Paula and C. S. C. Viana
3061-3071
Interactions of gamma rays with tungsten-doped lead phosphate glasses
Fatma Hatem ElBatal and Samir Yousef Marzouk
3072-3076
The role of friction to the indentation size effect in amorphous and crystallized Pd-based alloy
Ning Li, L. Liu and M. Zhang
3077-3081
Mechanical response of the TiAl/steel brazed joint under impact load
Yulong Li, Jicai Feng, He Peng and Zhang Hua
3082-3087
One-step template-free synthesis of ZnWO4 hollow clusters
Wei Zhao, Xinyu Song, Guozhu Chen and Sixiu Sun
3088-3097
Effects of curing time and temperature on strength development of inorganic polymeric binder based on natural pozzolan
Ebrahim Najafi Kani and Ali Allahverdi
3098-3111
On the acid–base stability of Keggin Al13 and Al30 polymers in polyaluminum coagulants
Zhaoyang Chen, Zhaokun Luan, Zhiping Jia and Xiaosen Li
3112-3117
Photocatalytic oxidation of dibenzothiophene using TiO2/bamboo charcoal
Juan Zhang, Dishun Zhao, Jinlong Wang and Liyan Yang
3118-3124
Preparation and characterization of poly(vinyl chloride) calcium carbonate nanocomposites via melt intercalation
C. B. Patil, U. R. Kapadi, D. G. Hundiwale and P. P. Mahulikar
3125-3134
Ionomeric modification of metallocene-based polyolefinic elastomers with varied pendant chain length and its influence on physico-mechanical properties
Anjan Biswas, Abhijit Bandyopadhyay, Nikhil K. Singha and Anil K. Bhowmick
3135-3140
Image analysis of the microstructure of magnetorheological elastomers
A. Boczkowska, S. F. Awietjan, T. Wejrzanowski and K. J. Kurzydłowski
3141-3147
Polyurethane foam containing microencapsulated phase-change materials with styrene–divinybenzene co-polymer shells
Ming You, XingXiang Zhang, JianPing Wang and XueChen Wang
3148-3155
Electrochemical synthesis and characterization of a new soluble conducting polymer
Yasemin Arslan Udum, Yavuz Ergun, Yücel Sahin, Kadir Pekmez and Attila Yildiz
3156-3164
Artificial neural network prediction of glass transition temperature of fluorine-containing polybenzoxazoles
Liwei Ning
3165-3171
UV-cured epoxy coating reinforced with sepiolite as inorganic filler
M. Sangerano, E. Pallaro, I. Roppolo and G. Rizza
3172-3178
Preparation and properties of alternating 2,7-linked carbazole copolymers with phenylene units with varying number of fluorine substituents
David F. Pickup, Hunan Yi and Ahmed Iraqi
3179-3185
Method for amine–amine attachment in nanodevice preparation
Choon Young Lee, Dong Woo Ki and Ajit Sharma
3186-3191
Electrospinning of poly (2-ethyl-2-oxazoline)
Lorea Buruaga, Alba Gonzalez and Juan J. Iruin
3192-3197
The influence of thermal annealing on the morphology and structural properties of a conjugated polymer in blends with an organic acceptor material
David E. Motaung, Gerald F. Malgas, Christopher J. Arendse, Sipho E. Mavundla and Clive J. Oliphant, et al.
3198-3210
Effect of thermal residual stresses on the strength for both alumina/Ni/alumina and alumina/Ni/nickel alloy bimaterials
M. L. Hattali, S. Valette, F. Ropital, N. Mesrati and D. Tréheux
3211-3217
In situ preparation of self-bonded zeolite MCM-22 bodies by vapor-phase transport method
Xingsheng Liu, Yingxia Li, Biaohua Chen and Tianying Niu
3218-3222
Facile preparation of Ag/ZnO nanoparticles via photoreduction
Tarek Alammar and Anja-Verena Mudring
3223-3228
Microstructures and properties of Bi3.25La0.75Ti2.94V0.06O12 ferroelectric thin film deposited by sol–gel method
Jianjun Li, Jun Yu, Jia Li, Bin Zhou and Guangxing Zhou, et al.
3229-3234
Electrical, thermal, and dielectric properties of PbZr1−xSnxO3 (0 ≤ x ≤ 0.3) single crystals
I. Jankowska-Sumara, A. Majchrowski and J. Żmija
3235-3240
Structural and electronic properties of tellurite glasses
Simona Rada, Eugen Culea, Marius Rada, Petru Pascuta and Vistrian Maties
3241-3247
Synergistic effects in network formation and electrical properties of hybrid epoxy nanocomposites containing multi-wall carbon nanotubes and carbon black
Jan Sumfleth, Xavier Cordobes Adroher and Karl Schulte
3248-3254
Latex derived blends of poly(vinyl acetate) and natural rubber: thermal and mechanical properties
Stephen S. Ochigbo, Adriaan S. Luyt and Walter W. Focke
3255-3264
New route to process uni-directional carbon fiber reinforced (SiC + ZrB2) matrix mini-composites
N. Padmavathi, K. K. Ray, J. Subrahmanyam, P. Ghosal and Sweety Kumari
3265-3272
Comparison of the coatings deposited using Ti and B4C powder by reactive plasma spraying in air and low pressure
Zhengping Mao, Jing Ma, Jun Wang and Baode Sun
3273-3284
TiB2-reinforced composite coating by gas tungsten arc welding
S. O. Yilmaz and M. Ozenbas
3285-3295
Effect of different catalyst supports on the (n,m) selective growth of single-walled carbon nanotube from Co–Mo catalyst
Bo Wang, Yanhui Yang, Lain-Jong Li and Yuan Chen
3296-3304
An experimental analysis of effective high speed turning of superalloy Inconel 718
D. G. Thakur, B. Ramamoorthy and L. Vijayaraghavan
3305-3314
Isothermal fatigue behavior of cast superalloy Inconel 792-5A at 23 and 900 °C
Karel Obrtlík, Martin Petrenec, Jiří Man, Jaroslav Polák and Karel Hrbáček
3315-3318
Letter
Thickness-induced crystallization of amorphous In2O3 films: influence of the film deposition rate
S. Muranaka and N. Hayashi