3619-3625
A detailed investigation of the mechanical properties of polybenzoxazole fibers within soft body armor
Gale A. Holmes, Jae Hyun Kim, Walter G. McDonough, Michael A. Riley and Kirk D. Rice
3626-3632
A fiber placement device and methodology for preparing 2-D and 3-D combinatorial microcomposites
J. H. Kim, J. W. Hettenhouser, C. K. Moon and G. A. Holmes
3633-3642
Characterization of phase transformations and shape memory behavior of Fe–27.79Mn–2.72Si (wt%) alloy by thermomechanical and thermal treatments
Murat Eskil and Mehmet Ceylan
3643-3651
Influence of carbon fibre treatment and filler addition on porosity and structure change of carbon fibres reinforced phenolic matrix composites during carbonization
Pierre Baudry, Marie-Anne Dourges and René Pailler
3652-3661
Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression
Laurent Mezeix, Christophe Bouvet, Julitte Huez and Dominique Poquillon
3662-3673
Synthesis, characterization and thermal analysis of Fe-doped boehmite nanofibres and nanosheets
Yanyan Zhao, Jing Yang, Ray L. Frost, János Kristóf and Erzsébet Horváth
3674-3681
Long-term performance of polyetheretherketone-based polymer electrolyte membrane in fuel cells at 95 °C
Jinhua Chen, Maolin Zhai, Masaharu Asano, Ling Huang and Yasunari Maekawa
3682-3686
Physical, optical, and electrical properties of a new conducting polymer
Mahnaz M. Abdi, Anuar Kassim, H. N. M. Ekramul Mahmud, Wan Mahmood Mat Yunus and Zainal Abidin Talib, et al.
3687-3693
Spindlelike Y2O3:Eu3+ nanorod bundles: hydrothermal synthesis and photoluminescence properties
Shengliang Zhong, Shijin Wang, Huaping Xu, Haoqing Hou and Zubiao Wen, et al.
3694-3701
Tensile behaviors of polyamide 6/UHLE blends
Hongjun Luo, Zhuo Fu, Bo Jing, Jian Shi and Xiaoxuan Zou, et al.
3702-3711
The effect of the curing time and temperature on final properties of flexible PVC with an epoxidized fatty acid ester as natural-based plasticizer
O. Fenollar, L. Sanchez-Nacher, D. Garcia-Sanoguera, J. López and R. Balart
3712-3718
Preparation of porous polyacrylate/poly(ethylene glycol) interpenetrating network hydrogel and simplification of Flory theory
Qunwei Tang, Xiaoming Sun, Qinghua Li, Jianming Lin and Jihuai Wu
3719-3730
Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology
D. Dimas, I. Giannopoulou and D. Panias
3731-3735
Effect of the titanium ion concentration on electrodeposition of nanostructured TiNi films
Hae-Min Lee, Santosh K. Mahapatra, John Kiran Anthony, Fabian Rotermund and Chang-Koo Kim
3736-3740
Microstructural evolution during batch annealing of boron containing aluminum-killed steel
Anjana Deva, B. K. Jha and N. S. Mishra
3741-3746
Calculation of relative thermal elongation of structural steels
Dilip K. Banerjee and Ursula R. Kattner
3747-3750
Joining of carbon/carbon composites for nuclear applications
F. T. Lan, K. Z. Li, H. J. Li, Y. G. He and X. T. Shen, et al.
3751-3757
Effects of Nb2O5 doping on the microstructure and the dielectric temperature characteristics of barium titanate ceramics
Y. Yuan, S. R. Zhang, X. H. Zhou and B. Tang
3758-3763
Electrophoretic deposition of silver from organic PDADMAC-stabilized suspensions
Max Kinzl, Klaus Reichmann and Lukas Andrejs
3764-3769
Microstructural modification during isothermal ageing of a low nickel duplex stainless steel
I. Calliari, K. Brunelli, M. Zanellato, E. Ramous and R. Bertelli
3770-3776
Measurement of interfiber friction force for pulp fibers by atomic force microscopy
Fang Huang, Kecheng Li and Artem Kulachenko
3777-3783
In situ assembly of ZSM-5 nanocrystals into micro-sized single-crystal-like aggregates via acid-catalyzed hydrolysis of tetraethylorthosilicate
Jing Gu, Yajing Wu, Jun Wang, Youdong Lu and Xiaoqian Ren
3784-3792
Carbothermal reduction and nitridation synthesis of silicon nitride by using solution combustion synthesized precursors
Shyan-Lung Chung and Chih-Wei Chang
3793-3799
On the metastable miscibility gap in liquid Cu–Cr alloys
Z. M. Zhou, Jianrong Gao, F. Li, Y. K. Zhang and Y. P. Wang, et al.
3800-3806
Influence of different deformation processing on the AZ31 magnesium alloy sheets
Su-Qin Zhu, Hong-Ge Yan, Wei-Jun Xia, Ji-Zi Liu and Jun-Feng Jiang
3807-3812
Deep drawing behaviour of ultrafine grained copper: modelling and experiment
X. Ma, R. Lapovok, C. Gu, A. Molotnikov and Y. Estrin, et al.
3813-3818
High-throughput SEM preparation of proteinaceaous extracellular matrix
Maja Wiegemann and Frank Lehmann
3819-3823
Properties of a carbon woven fabric filter grown SiC whisker by chemical vapor infiltration
Ik Whan Kim, Yoo Youl Choi, Jun Gyu Kim and Doo-Jin Choi
3824-3832
Ultimate tensile strength of loblolly pine strands using stochastic finite element method
Gi Young Jeong and Daniel P. Hindman
3833-3840
Structure and electrical properties of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–BiCoO3 lead-free piezoelectric ceramics
Changrong Zhou, Xinyu Liu, Weizhou Li, Changlai Yuan and Guohua Chen
3841-3851
Constitutive models of creep for lead-free solders
Hongtao Ma
3852-3860
Functionalization of textile materials by alkoxysilane-grafted titanium dioxide
Jadwiga Sójka-Ledakowicz, Joanna Lewartowska, Marcin Kudzin, Marcin Leonowicz and Teofil Jesionowski, et al.
3861-3866
Effects of additional elements (M) on the thermal stability and structure of (Zr52.2Cu39.1Al8.7)100−xMx (M = Ag, Be, Gd, x = 8, 7, 2) amorphous alloys
Yong Xu, Yanli Wang, Xiongjun Liu, Guoliang Chen and Yong Zhang
3867-3876
Compressive properties of a new metal–polymer hybrid material
Daniel R. A. Cluff and Shahrzad Esmaeili
3877-3882
A single phase semiconducting Ca-silicide film growth by sputtering conditions, annealing temperature and annealing time
Yang Yinye and Xie Quan
3883-3888
Phase formation in rapidly quenched Cu-based alloys
Devinder Singh, T. P. Yadav, R. S. Tiwari and O. N. Srivastava
3889-3899
Shape-selective synthesis and opto-electronic properties of Eu3+-doped gadolinium oxysulfide nanostructures
J. Thirumalai, R. Chandramohan, S. Valanarasu, T. A. Vijayan and R. M. Somasundaram, et al.
3900-3904
Letter
Bridging stresses from R-curves of silicon nitrides
S. Fünfschilling, T. Fett, M. J. Hoffmann, R. Oberacker and H. Jelitto, et al.
3905-3908
Letter
Irradiation pre-curing plus oxidation curing for rapid preparation of silicon carbide fibers
Ming Tang, Zhiming Su, Zhoucheng Wang, Litong Zhang and Lifu Chen
3909-3912
Letter
Rapid synthesis of TiB2/Fe composite in situ by spark plasma sintering
Binghong Li, Ying Liu, Hui Cao, Lin He and Jun Li
3913-3916
Letter
Influence of strain rate on strength and ductility in an aluminum alloy processed by equal-channel angular pressing
Praveen Kumar, Cheng Xu and Terence G. Langdon