4211-4218
Review
Applications of electron backscatter diffraction to materials science: status in 2009
Valerie Randle
4219-4227
Effects of the wrinkled fabric preform on the bending properties of resin transfer molded composites
Thanh Trung Do and Dong-Joo Lee
4228-4234
Stress corrosion cracking of 2205 duplex stainless steel in H2S–CO2 environment
Z. Y. Liu, C. F. Dong, X. G. Li, Q. Zhi and Y. F. Cheng
4235-4240
Graphitization behavior of iodine-treated Bombyx mori silk fibroin fiber
Md. Majibur Rahman Khan, Yasuo Gotoh, Hideaki Morikawa and Mikihiko Miura
4241-4245
Influence of annealing on rheological and conductive behaviors of high-density polyethylene/carbon black composites
Qing Cao, Yihu Song, Zhihua Liu and Qiang Zheng
4246-4251
Sterically hindered phthalocyanines: solution–phase interactions with carbon monoxide
M. Alarjah, L. Paniwnyk, I. R. Peterson, J. P. Lorimer and D. J. Walton
4252-4257
Energy-efficient green synthesis of Nd:Y2O3 nanopowder by microwave gel combustion
Mann Rekha, Kiranmala Laishram, Ravi Kumar Gupta, Neelam Malhan and Ashok Kumar Satsangi
4258-4263
Study on Ti fiber reinforced TiAl3 composite by infiltration-in situ reaction
Y. M. Liu, Z. Y. Xiu, G. H. Wu, W. S. Yang and G. Q. Chen, et al.
4264-4269
Tensile deformation of a Mg–2.54Nd–0.26Zn–0.32Zr alloy at elevated temperature
Z. L. Ning, G. J. Wang, F. Y. Cao, J. F. Sun and J. F. Du
4270-4278
Free-volume properties and toughening behavior of cyanate ester resin/carboxyl-randomized liquid butadiene-acrylonitrile rubber composites
Minfeng Zeng, Xudong Sun, Xiandong Yao, Yun Wang and Mingzhu Zhang, et al.
4279-4285
The effect of skin characteristics on the environmental behavior of die cast AZ91 magnesium alloy
E. Aghion and N. Lulu
4286-4295
Control of morphology in inert-gas condensation of metal oxide nanoparticles
Wesley O. Gordon, John R. Morris and Brian M. Tissue
4296-4302
Novel sintered glass-ceramics from vitrified oil well drill cuttings
O. E. Abbe, S. M. Grimes, G. D. Fowler and A. R. Boccaccini
4303-4307
Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite
X. Wang, G. Q. Chen, B. Li, G. H. Wu and D. M. Jiang
4308-4314
Fracture characteristics of high impact polystyrene under impact fatigue loadings
Taner Yilmaz, Tulin Sahin and Tamer Sinmazcelik
4315-4320
Effect of heat-treatment on CdS and CdS/ZnS nanoparticles
Kwanhwi Park, Hong Jeong Yu, Won Keun Chung, Byung-Jea Kim and Sung Hyun Kim
4321-4325
Ferroelectric properties of (1 − x)Bi(Zn1/2Ti1/2)O3–xPbZrO3 ceramics
O. Khamman, X. Tan, S. Ananta and R. Yimnirun
4326-4333
Development of sensors based on CuO-doped SnO2 hollow spheres for ppb level H2S gas sensing
Lifang He, Yong Jia, Fanli Meng, Minqiang Li and Jinhuai Liu
4334-4341
Studies on the mechanism of the structural evolution in Cu–Al–Ni elemental powder mixture during high energy ball milling
S. K. Vajpai, R. K. Dube and M. Sharma
4342-4347
Study of dilute Al–Cu solidification by cooling curve analysis
Osvaldo Fornaro and Hugo A. Palacio
4348-4353
Effect of annealing parameters on the magnetic properties of NiZn ferrite thin films
Ke Sun, Zhongwen Lan, Zhong Yu, Xiaoliang Nie and Lezhong Li, et al.
4354-4359
Phase transition characteristics and electrical properties of nitrogen-doped GeSb thin films for PRAM applications
Seung Yun Lee, Hyung Keun Kim, Jin Hyock Kim, Jae Sung Roh and Doo Jin Choi
4360-4369
Synthesis and characterization of WO3 and WS2 hexagonal phase nanostructures and catalytic test in sulfur remotion
R. Huirache-Acuña, F. Paraguay-Delgado, M. A. Albiter, L. Alvarez-Contreras and E. M. Rivera-Muñoz, et al.
4370-4378
Experimental and modeling study of the thermal conductivity of SiCp/Al composites with bimodal size distribution
Ke Chu, Chengchang Jia, Xuebing Liang, Hui Chen and Hong Guo, et al.
4379-4382
Determination of the fibre volume content in natural fibre-reinforced composites by ultimate analysis
T. Mahrholz and U. Riedel
4383-4388
PWA/silica/PFSA composite membrane for direct methanol fuel cells
Fangjian Shang, Lei Li, Yongming Zhang and Hong Li
4389-4393
Microstructural and mechanical behavior of Zr-based metallic glasses with the addition of Nb
X. M. Luo, Y. Zhou, J. Q. Lu, G. S. Yu and J. G. Lin, et al.
4394-4398
Comparison of Ca/P mineralization on the surfaces of poly (ε-caprolactone) composites filled with silane-modified nano-apatite
Chi Deng, Nin Yao, Xiong Lu, Shuxin Qu and Bo Feng, et al.
4399-4406
Open AccessActual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle
Johannes Konnerth, Notburga Gierlinger, Jozef Keckes and Wolfgang Gindl
4407-4412
Synthesis of Fe3O4 polyhedra by hydrothermal method: using l-arginine as precipitator
Lianfeng Duan, Shusheng Jia, Yanjun Wang, Jian Chen and Lijun Zhao
4413-4421
Structural characteristics and high-temperature oxidation behavior of porous Fe–40 at.%Al alloy
P. Z. Shen, M. Song, H. Y. Gao, Y. H. He and J. Zou, et al.
4422-4428
Preparation and application of Cu/Cr hydrotalcite-like compounds
Qingze Jiao, Hongbo Liu, Yun Zhao and Zhe Zhang
4429-4442
Microstructural studies of self-supported (1.5–10 μm) Pd/23 wt%Ag hydrogen separation membranes subjected to different heat treatments
W. M. Tucho, H. J. Venvik, J. C. Walmsley, M. Stange and A. Ramachandran, et al.
4443-4454
Microstructure and strengthening mechanisms of a cast Mg–1.48Gd–1.13Y–0.16Zr (at.%) alloy
L. Gao, R. S. Chen and E. H. Han
4455-4459
Sol–gel combustion synthesis of nanocrystalline LaMnO3 powders and photocatalystic properties
Yuanyuan Li, Shanshan Yao, Lihong Xue and Youwei Yan
4460-4465
Effects of metal oxides addition on the electrochemical performance of M1Ni3.5Co0.6Mn0.4Al0.5 hydrogen storage alloy
Hongxia Huang, Kelong Huang, Suqin Liu, Shuxin Zhuang and Dongyang Chen
4466-4471
Synthesis, characterization, and electrochemical properties of Ni(OH)2/ultra-stable Y zeolite composite
Jun-Wei Lang, Ling-Bin Kong, Wei-Jin Wu, Yong-Chun Luo and Long Kang
4472-4481
Influence of high temperature and high acidic conditions on geopolymeric composite material for steel pickling tanks
Deeptangshu Chaudhary and Huihua Liu
4482-4486
Letter
Effect of additive composition on microstructure and strength of porous silicon carbide ceramics
Jung-Hye Eom and Young-Wook Kim
4487-4490
Letter
The cyclic-fatigue behaviour of an epoxy polymer modified with micron-rubber and nano-silica particles
C. M. Manjunatha, A. C. Taylor, A. J. Kinloch and S. Sprenger
4491-4494
Letter
An hexagonal array of fourfold interconnected hexagonal nodules for modeling auxetic microporous polymers: a comparison of 2D and 3D models
Teik-Cheng Lim and Rajendra Acharya U
4495-4498
Letter
Nanostructuring and fluorescence properties of Eu3+:LiTaO3 in Li2O–Ta2O5–SiO2–Al2O3 glass-ceramics
Anal Tarafder, K. Annapurna, Reenamoni Saikia Chaliha, V. S. Tiwari and P. K. Gupta, et al.
4499-4502
Letter
Application of thermoelectric power measurements to the study of cold rolled austenitic stainless steels
C. Capdevila, T. De Cock, F. G. Caballero, D. San Martin and C. Garcia de Andres
4503-4506
Letter
Comment on “study on electrorheological properties of novel polymer-Ce4+ complex”
Seung Woo Ko and Hyoung Jin Choi
4507-4509
Letter
Preparation of γ-alumina ceramic foams employing hydrophilated polyester polyurethane sponges
Angela B. Sifontes, Marianis Urbina, Frank Fajardo, Luis Melo and Marta Mediavilla, et al.
4510
Erratum
Shape-selective synthesis and opto-electronic properties of Eu3+-doped gadolinium oxysulfide nanostructures
J. Thirumalai, R. Chandramohan, S. Valanarasu, T. A. Vijayan and R. M. Somasundaram, et al.