689-699
Pore evolution model of ceramic membrane during constrained sintering
Minghui Qiu, Jun Feng, Yiqun Fan and Nanping Xu
700-707
Mechanical behavior of NiTi shape memory alloy fiber reinforced Sn matrix “smart” composites
J. P. Coughlin, J. J. Williams and N. Chawla
708-714
The universal equation of state applied to analysis of EOS data for solid molybdenum and tungsten
Zhidong Tian, Lili Wang, Rui Xiong and Jing Shi
715-720
Synthesis of polyaniline nanostructures in different lamellar liquid crystals and application to lubrication
Genping Song, Jie Han, Jie Bo and Rong Guo
721-725
Effect of curing and pyrolysis processing on the ceramic yield of a highly branched polycarbosilane
Houbu Li, Litong Zhang, Laifei Cheng, Zhaoju Yu and Muhe Huang, et al.
726-733
Synthesis of polyacrylate/polyethylene glycol interpenetrating network hydrogel and its sorption for Fe3+ ion
Qunwei Tang, Xiaoming Sun, Qinghua Li, Jianming Lin and Jihuai Wu
734-744
Anisotropic thermal conductivity of three-layer laminated carbon-graphite composites from carbonized wood
Joko Sulistyo, Toshimitsu Hata, Masashi Fujisawa, Kozo Hashimoto and Yuji Imamura, et al.
745-753
Phase-field simulation of directional solidification of a binary alloy under different boundary heat flux conditions
Jinjun Tang and Xiang Xue
754-758
Preparation and characterization of gold nanoparticles using ascorbic acid as reducing agent in reverse micelles
Kai Sun, Jingxia Qiu, Jiwei Liu and Yuqing Miao
759-769
Novel precipitated silicas: an active filler of synthetic rubber
Teofil Jesionowski, Andrzej Krysztafkiewicz, Jolanta Żurawska and Karol Bula
770-777
Open AccessGrowth of massive cementite layers; thermodynamic parameters and kinetics
Marc Nikolussi, Andreas Leineweber and Eric Jan Mittemeijer
778-785
Evaluation of elastic properties of reduced NiO-8YSZ anode-supported bi-layer SOFC structures at elevated temperatures in ambient air and reducing environments
S. Biswas, T. Nithyanantham, N. T. Saraswathi and S. Bandopadhyay
786-793
Enhanced corrosion resistance of discontinuous anodic film on in situ TiB2p/A356 composite by cerium electrolysis treatment
Huanhuan Sun, Xianfeng Li, Dong Chen and Haowei Wang
794-798
Synthesis of In(OH)3 and In2O3 nanomaterials incorporating Au
Shih-Yeh Chen, Ming-Cheng Wu, Chi-Shen Lee and M. C. Lin
799-807
Modification of single-walled carbon nanotubes and its influence on the interfacial strength in polymeric composites
R. Mikael Larsen
808-815
Intra-granular alpha precipitation in Ti–Nb–Zr–Ta biomedical alloys
S. Nag, R. Banerjee and H. L. Fraser
816-820
Preparation of photostable quantum dot-polystyrene microbeads through covalent organosilane coupling of CdSe@Zns quantum dots
Qiangbin Wang and Dong-Kyun Seo
821-827
Photocatalytic degradation of methylene blue by Au-deposited TiO2 film under UV irradiation
Chihiro Yogi, Kazuo Kojima, Tomoo Takai and Noriyuki Wada
828-834
Study of the cohesion of TTCP/DCPA phosphate cement through evolution of cohesion time and remaining percentage
Gaoxiang Chen, Wanwan Li, Xiaoming Yu and Kang Sun
835-842
Study of microstructural evolution during static recrystallization in a low alloy steel
Y. C. Lin and Ming-Song Chen
843-848
Dense spinel MnCo2O4 film coating by aerosol deposition on ferritic steel alloy for protection of chromic evaporation and low-conductivity scale formation
Jong-Jin Choi, Jungho Ryu, Byung-Dong Hahn, Woon-Ha Yoon and Byoung-Kuk Lee, et al.
849-854
Preparation and electrical conductivity of SiO2/polypyrrole nanocomposite
Qunwei Tang, Xiaoming Sun, Qinghua Li, Jianming Lin and Jihuai Wu
855-860
Low-temperature sintering of ZrW2O8–SiO2 by spark plasma sintering
Kenji Kanamori, Tohru Kineri, Ryohei Fukuda, Takafumi Kawano and Keishi Nishio
861-868
Rutile thin film responsive to visible light and with high UV light sensitivity
Hiroki Nagai, Sohei Aoyama, Hiroki Hara, Chihiro Mochizuki and Ichiro Takano, et al.
869-874
Solid–liquid structural break-up in M2 tool steel for semi-solid metal processing
M. Z. Omar, H. V. Atkinson, A. A. Howe, E. J. Palmiere and P. Kapranos, et al.
875-881
High-porosity NiTi superelastic alloys fabricated by low-pressure sintering using titanium hydride as pore-forming agent
H. Li, B. Yuan, Y. Gao, C. Y. Chung and M. Zhu
882-888
Laser bonding and characterization of Kapton® FN/Ti and Teflon® FEP/Ti systems
Grigor L. Georgiev, Taslema Sultana, Ronald J. Baird, Gregory Auner and Golam Newaz, et al.
889-896
The synthesis and characterisation of grafted random styrene butadiene for biomedical applications
James E. Kennedy, Declan M. Devine, John G. Lyons, Luke M. Geever and Clement L. Higginbotham
897-902
Microstructural study of adiabatic shear bands formed in serrated chips during high-speed machining of hardened steel
C. Z. Duan, Y. J. Cai, M. J. Wang and G. H. Li
903-918
Effect of polar modification on morphology and properties of styrene-(ethylene-co-butylene)-styrene triblock copolymer and its montmorillonite clay-based nanocomposites
Anirban Ganguly and Anil K. Bhowmick
919-925
Coprecipitation synthesis and optical absorption property of Zn2TixSn1–xO4 (0 ≤ x ≤ 1) solid solutions
Cun Wang and Bo-Qing Xu
926-930
Preparation of γ-Fe2O3 nanopowders by direct thermal decomposition of Fe-urea complex: reaction mechanism and magnetic properties
S. Zhao, H. Y. Wu, L. Song, O. Tegus and S. Asuha
931-938
Macroporous alumina monoliths prepared by filling polymer foams with alumina hydrosols
Yuan Zhang, Hao Liang, Cun Yu Zhao and Yuan Liu