3683-3696
Crystallization in glass: elucidating a realm of diversity by transmission electron microscopy
Thomas Höche
3697-3706
Open AccessCharacterisation of hollow Russian doll microspheres
Shakiela Begum, Ian P. Jones, Chengge Jiao, Daniel E. Lynch and Jon A. Preece
3707-3713
Synthesis, characterisation and thermal behaviour of lithium aluminosilicate inorganic polymers
Sean J. O’Connor and Kenneth J. D. MacKenzie
3714-3719
Effect of water content on the piezoresistivity of MWNT/cement composites
Baoguo Han, Xun Yu and Jinping Ou
3720-3726
Elastic, electronic, and vibrational properties of RhN compound
E. Deligoz, K. Colakoglu and Y. O. Ciftci
3727-3734
Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route
Man Zhu, Gencang Yang, Lijuan Yao, Suling Cheng and Yaohe Zhou
3735-3740
Aspect ratio-dependent optical properties of Ni–P/AAO nano-array composite structure
Feng-Hua Wang, Ya-Fang Tu, Jian-Ping Sang, Sheng-You Huang and Xian-Wu Zou
3741-3751
Evolution of structure and performance of Cu-based layered double hydroxides
L. H. Zhang, F. Li, D. G. Evans and X. Duan
3752-3756
Electrochemical properties of Co(OH)2 powders as an anode in an alkaline battery
Yan Yao, Xiangyu Zhao, Liqun Ma, Tienan Qin and Meng Yang, et al.
3757-3767
The effect of temperature on fatigue damage of FRP composites
H. Mivehchi and A. Varvani-Farahani
3768-3777
Ultrasonic evaluation of polyether ether ketone and carbon fiber-reinforced PEEK
David A. Fitch, Brent K. Hoffmeister and Javier de Ana
3778-3783
An alternative approach of solid-state reaction to prepare nanocrystalline KNbO3
Tingting Su, Heng Jiang, Hong Gong and Yuchun Zhai
3784-3790
Synthesis and sintering of nano-sized BaSnO3 powders containing BaGeO3
Roberto Köferstein, Lothar Jäger, Mandy Zenkner, Francisco Javier García-García and Stefan G. Ebbinghaus
3791-3796
Field emission properties of one-dimensional single CuO nanoneedle by in situ microscopy
Yueli Liu, Lei Zhong, Zhuoyin Peng, Yanbao Song and Wen Chen
3797-3803
Effect of Zn content on the microstructures and mechanical properties of laser beam-welded ZK series magnesium alloys
Z. H. Yu, H. G. Yan, J. H. Chen and Y. Z. Wu
3804-3811
Effect of ultrasound radiation on the size and size distribution of synthesized copper particles
Jafar Moghimi-Rad, Fatemeh Zabihi, Iraj Hadi, Sadollah Ebrahimi and Taghi Dallali Isfahani, et al.
3812-3823
Influence of ductile interlayers on mechanical behaviour of hard coatings under depth-sensing indentation: a numerical study on TiAlN
N. A. Sakharova, J. V. Fernandes, M. C. Oliveira and J. M. Antunes
3824-3832
Effect of pH value on the synthesis and characterization of Ba0.5Sr0.5Co0.8Fe0.2O3−δ powders prepared by the citrate–EDTA complexing method
I.-Ming Hung, Chen-Yu Liang, Chun-Jing Ciou, Ren-Zheng Song and Zu-Yu Lai
3833-3840
Physiochemical characterizations of electrospun (ZnO–GeO2) nanofibers and their optical properties
Muzafar A. Kanjwal, Nasser A. M. Barakat, Faheem A. Sheikh, Dae Kwang Park and Hak Yong Kim
3841-3850
Interfacial adhesion improvement of plain woven carbon fiber reinforced epoxy filled with micro-fibrillated cellulose by addition liquid rubber
Mohamed H. Gabr, Mostafa Abd Elrahman, Kazuya Okubo and Toru Fujii
3851-3857
Structure and photoluminescence properties of ZnS nanowires sheathed with SnO2 by atomic layer deposition
Kyungjoon Baek, Changhyun Jin, Jungkeun Lee, Bong-Yong Jeong and Wan In Lee, et al.
3858-3865
Poly(anthranilic acid)/multi-walled carbon nanotube composites: spectral, morphological, and electrical properties
Matru Prasad Dash, Minaketan Tripathy, Abhisek Sasmal, Gourang C. Mohanty and P. L. Nayak
3866-3873
Synthesis and photoelectric property of poly(3-octylthiophene)/ferric oxide complexes
Zhiyue Han, Jingchang Zhang, Xiuying Yang, Hong Zhu and Weiliang Cao
3874-3881
Microplasticity phenomena in thermomechanically strained nickel thin films
A. A. Taylor, S. H. Oh and G. Dehm
3882-3894
Particle cavitation in rubber toughened epoxies: the role of particle size
F. J. Guild, A. J. Kinloch and A. C. Taylor
3895-3900
Controlled growth of TiO2 nanorods capped with carboxylate groups by the solvothermal process
Eun Yi Kim, Hyorim Choi and Chin Myung Whang
3901-3911
Machining damage analysis of alumina in relation to thermal shock behavior
Ana L. Cavalieri, Norma Míngolo and Analía G. Tomba Martinez
3912-3920
Comparative study on characteristics of hybrid laser-TIG welded AZ61/Q235 lap joints with and without interlayers
Xiao-dong Qi and Li-ming Liu
3921-3930
Relation between microstructure and Charpy impact properties of an elemental and pre-alloyed 14Cr ODS ferritic steel powder after hot isostatic pressing
Z. Oksiuta, E. Boehm-Courjault and N. Baluc
3931-3937
Microstructures and high temperature oxidation resistance of alloys from Nb–Cr–Si system
S. K. Varma, Clemente Parga, Krista Amato and Jennifer Hernandez
3938-3946
Regression analysis of manufacturing electrospun nonwoven nanotextiles
S. N. Patra, R. J. T. Lin and D. Bhattacharyya
3947-3953
Structural and electrochemical performance of three-dimensional LiMn2O4 thin film
Bo Gun Park, Soohyun Kim, Il-Doo Kim and Yong Joon Park
3954-3956
Letter
Stability predictions of solid Li-ion conducting membranes in aqueous solutions
J. Wolfenstine
3957-3960
Letter
Thermomechanical experiment and analysis on shape recovery properties of shape memory polymer influenced by fiber reinforcement
M. Nishikawa, K. Wakatsuki and N. Takeda
3961-3965
Letter
Effect of elemental diffusion on temperature coefficient of piezoelectric properties in KNN-based lead-free composites
Cheol-Woo Ahn, Chee-Sung Park, Robert Dittmer, Soon-Hyung Hong and Shashank Priya
3966-3968
Letter
Development of layered porous poly(l-lactide) for bone regeneration
Joo-Eon Park and Mitsugu Todo