1-13
Original Paper
Influence of Oxidation Temperature and Cr Content on the Adhesion and Microstructure of Scale on Low Cr Steels
Mikako Takeda, Hitoshi Kushida, Takashi Onishi, Masao Toyama and Fujio Koizumi, et al.
15-41
Original Paper
Open AccessEffect of Substrate Grain Size on the Growth, Texture and Internal Stresses of Iron Oxide Scales Forming at 450 °C
C. Juricic, H. Pinto, D. Cardinali, M. Klaus and Ch. Genzel, et al.
43-64
Original Paper
High-Temperature Oxidation of Fe3Al and Fe3Al–Zr Intermetallics
S. Chevalier, P. Juzon, G. Borchardt, A. Galerie and K. Przybylski, et al.
65-81
Original Paper
Complete Kinetic Maps for Binary Alloys Forming Two Insoluble Oxides Under High Oxygen Pressures
F. Gesmundo, S. Wang and Y. Niu
83-93
Original Paper
Effect of Water Vapor on the Spallation of Thermal Barrier Coating Systems During Laboratory Cyclic Oxidation Testing
V. Déneux, Y. Cadoret, S. Hervier and D. Monceau
95-113
Original Paper
Characterization of Sulfur Distribution in Ni-Based Superalloy and Thermal Barrier Coatings After High Temperature Oxidation: A SIMS Analysis
T. Gheno, D. Monceau, D. Oquab and Y. Cadoret
115-138
Original Paper
Open AccessEvolution of Microstructure and Internal Stresses in Multi-Phase Oxide Scales Grown on (110) Surfaces of Iron Single Crystals at 650 °C
C. Juricic, H. Pinto, D. Cardinali, M. Klaus and Ch. Genzel, et al.
139-162
Original Paper
Iron Oxidation at Low Temperature (260–500 °C) in Air and the Effect of Water Vapor
N. Bertrand, C. Desgranges, D. Poquillon, M. C. Lafont and D. Monceau
163-181
Original Paper
Effect of Zr Addition on the High-Temperature Oxidation Behaviour of Mo–Si–B Alloys
S. Burk, B. Gorr, V. B. Trindade and H.-J. Christ
183-192
Original Paper
Oxidation of AM60B Mg Alloys Containing Dispersed SiC Particles in Air at Temperatures Between 400 and 550 °C
Thuan Dinh Nguyen and Dong Bok Lee
193-206
Original Paper
The Role of the γ′ Precipitate Dispersion in Forming a Protective Scale on Ni-Based Superalloys at 750 °C
I. M. Edmonds, H. E. Evans and C. N. Jones
207-218
Original Paper
Oxidation Behavior of Ni–Cr–Fe-Based Alloys: Effect of Alloy Microstructure and Silicon Content
Yingcai Liu, Weifeng Wei, Les Benum, Mike Oballa and Mike Gyorffy, et al.
219-232
Original paper
High Temperature Oxidation of the Al3Mg2 Complex Metallic Alloy
M.-N. de Noirfontaine, G. Baldinozzi, M.-G. Barthés-Labrousse, J. Kusinski and G. Boëmare, et al.
233-253
Original Paper
Alumina Scale Formation on a Powder Metallurgical FeCrAl Alloy (Kanthal APMT) at 900–1,100 °C in Dry O2 and in O2 + H2O
J. Engkvist, S. Canovic, K. Hellström, A. Järdnäs and J.-E. Svensson, et al.
255-274
Original paper
Metal Dusting of Nickel–Aluminium Alloys
P. Speck, D. J. Young and J. Zhang
275-288
Original Paper
Transient Oxidation of a γ-Ni–28Cr–11Al Alloy
L. Hu, D. B. Hovis and A. H. Heuer
289-309
ORIGINAL PAPER
Microstructure Evolution During Steam Oxidation of a Nb Stabilized Austenitic Stainless Steel
A. N. Hansson, K. Pantleon, F. B. Grumsen and M. A. J. Somers
311-335
ORIGINAL PAPER
The Effects of Pre-Oxidation and Alloy Chemistry of Austenitic Stainless Steels on Glass/Metal Sealing
D. F. Susan, J. A. Van Den Avyle, S. L. Monroe, N. R. Sorensen and B. B. McKenzie, et al.
337-352
ORIGINAL PAPER
Water Vapour Effects on Fe–Cr Alloy Oxidation
Norinsan K. Othman, Jianqiang Zhang and David J. Young