1-8
A Roadmap for Thermal Metrology
J. Bojkovski, J. Fischer, G. Machin, F. Pavese and A. Peruzzi, et al.
9-19
Design and Evaluation of Large-Aperture Gallium Fixed-Point Blackbody
V. B. Khromchenko, S. N. Mekhontsev and L. M. Hanssen
20-35
Development of Gallium and Gallium-Based Small-Size Eutectic Melting Fixed Points for Calibration Procedures on Autonomous Platforms
A. Burdakin, B. Khlevnoy, M. Samoylov, V. Sapritsky and S. Ogarev, et al.
36-46
Collaboration Between UME and LNE-INM on Co–C Eutectic Fixed-Point Construction and Characterization
M. Sadli, O. Pehlivan, F. Bourson, A. Diril and K. Ozcan
47-58
Experience of Construction and Study of Pt–C Eutectic in VNIIM and Cooperation with LNE-INM
M. S. Matveyev, M. Sadli, Yu. A. Sild, A. I. Pokhodun and F. Bourson
59-68
Manufacturing of MC Eutectics and Reproducibility of Pt-C Eutectic Fixed Points using a Thermogauge Furnace
T. Wang, D. Lowe and G. Machin
69-76
Thermal Effects in the HTBB-3200pg Furnace on Metal-Carbon Eutectic Point Implementation
M. Sadli, K. Anhalt, F. Bourson, S. Schiller and J. Hartmann
77-97
Low-Temperature Blackbodies for IR Calibrations in a Medium-Background Environment
S. A. Ogarev, M. L. Samoylov, N. A. Parfentyev and V. I. Sapritsky
98-104
A High-Emissivity Blackbody with Large Aperture for Radiometric Calibration at Low-Temperature
Hsin-Yi Ko, Bor-Jiunn Wen, Shu-Fei Tsa and Guo-Wei Li
105-123
Characterizing the NRC Blackbody Sources for Radiation Thermometry from 150 °C to 962 °C
K. D. Hill and D. J. Woods
124-130
Approximating the ITS-90 between Zinc and Copper with an Infrared Thermometer at NIS-Egypt
M. G. Ahmed and K. Ali
131-143
Infrared Filter Radiometers for Thermodynamic Temperature Determination below 660 °C
N. Noulkow, R. D. Taubert, P. Meindl and J. Hollandt
144-154
The Double-Wavelength Technique—An Alternative Technique to Determine Thermodynamic Temperature
E. R. Woolliams, R. Winkler, S. G. R. Salim, P. M. Harris and I. M. Smith
155-166
Optical Diffraction Corrections in Radiometric Thermodynamic Temperature Determination
S. Briaudeau, B. Rougié, M. Sadli, A. Richard and J. M. Coutin
167-178
Spatial Scatter Effects in the Calibration of IR Pyrometers and Imagers
J. Envall, S. N. Mekhontsev, Y. Zong and L. M. Hanssen
179-191
The Influence of Distance and Focus on the Calibration of Infrared Radiation Thermometers
Hugo Rodriguez and Edgar Mendez-Lango
192-202
New PTB Setup for the Absolute Calibration of the Spectral Responsivity of Radiation Thermometers
K. Anhalt, A. Zelenjuk, D. R. Taubert, T. Keawprasert and J. Hartmann
203-219
Radiation Thermometry and Emissivity Measurements Under Vacuum at the PTB
C. Monte, B. Gutschwager, S. P. Morozova and J. Hollandt
220-226
Influence of Non-ideal Blackbody Radiator Emissivity and a Method for its Correction
Z. Yuan
227-235
Linearity Study of a Spectral Emissivity Measurement Facility
Z. Yuan, J. Zhang, J. Zhao, Y. Liang and Y. Duan
236-248
New Vacuum Blackbody Cavity for Heat Flux Meter Calibration
J.-R. Filtz, T. Valin, J. Hameury and J. Dubard
249-256
Research on the Temperature and Emissivity Measurement of the Metallic Thermal Protection Blanket
Xiaogang Sun, Peng Xiao, Guibin Yuan and Jingmin Dai
257-264
Development of a Heat-Pipe-Based Hot Plate for Surface-Temperature Measurements
L. Rosso, N. Koneva and V. Fernicola
265-275
In situ Gas Temperature Measurements by UV-Absorption Spectroscopy
A. Fateev and S. Clausen
276-283
System for Realizing the Triple Point of Mercury to Calibrate Industrial-Type Platinum Resistance Thermometers
D. Licea-Panduro and E. Méndez-Lango
284-295
NMIA Realization of the ITS-90 Based on Fixed-Point Cell Ensembles
Mark Ballico and Kim Nguyen
296-305
Current Work on Furnaces and Data Analysis to Improve the Uniformity and Noise Levels for Metal Fixed Points
D. I. Head, J. Gray and M. de Podesta
306-315
A CFD Study on a Calibration System for Contact Temperature Probes
F. Arpino, V. Fernicola, A. Frattolillo and L. Rosso
316-324
Low-Magnetoresistance RuO2–Al2O3 Thin-Film Thermometer and its Application
Y. Y. Chen, P. C. Chen, C. B. Tsai, K. I. Suga and K. Kindo
325-333
Adiabatic Calorimetry as Support to the Certification of High-Purity Liquid Reference Materials
A. Baldan, R. Bosma, A. Peruzzi, A. M. H. van der Veen and Y. Shimizu
334-340
A System to Measure Both Inner and Outer Car Tire Temperatures “in situ”
P. Koštial, M. Mokryšová, J. Šišáková, Z. Mošková and S. Rusnáková
341-350
NIST–NRC Comparison of Total Immersion Liquid-in-Glass Thermometers
K. D. Hill, D. J. Gee, C. D. Cross and G. F. Strouse
351-359
Proficiency Testing for Achieving Accreditation in Thermometry
S. Bruce and G. F. Strouse
360-369
Demonstrating Competency and Equivalency of Two Commercial SPRT Calibration Facilities
T. J. Wiandt