ASME-ISPS/JSME-IIP joint conference on Micromechatronics for Information and Precision Equipment, Santa Clara, California, USA, 2006
731-732
Editorial
2006 ASME-ISPS/JSME-IIP joint conference on micromechatronics for information and precision equipment, Santa Clara, California, USA
I. Y. Shen and S. Saegusa
733-740
Technical Paper
Probe recording technology using novel MEMS devices
J. P. Yang, J. Q. Mou, N. B. Chong, Y. Lu and H. Zhu, et al.
741-749
Technical Paper
Disk resonance due to electro-magnetic excitation
Guojin Yue, Michael J. Rogers and Cruz Calderon
751-757
Technical Paper
Fabrication and experimental study of Al2O3-TiC sliders with piezoelectric nanoactuators for flying height control
Jia-Yang Juang, Rohit P. Ambekar, David B. Bogy and C. Singh Bhatia
759-766
Technical Paper
Optimization of 3.5-in. HDD spindle motors for OP-vibration performance: theoretical prediction and experimental verification
Baekho Heo, Ho Seong Lee and Wooseong Kim
767-775
Technical Paper
Study on flow-induced vibration of head–disk assembly mechanisms in actual hard disk drive
Shigenori Takada, Takashi Kusukawa, Norio Tagawa, Atsunobu Mori and Yoshiaki Mizoh, et al.
777-796
Technical Paper
Design of swing arm type actuators considering thermal and dynamic characteristics
Chul Park, Jeonghoon Yoo, No-Cheol Park, Young-Pil Park and Takeshi Shimano, et al.
797-809
Technical Paper
Investigation of the electromechanical variables of the spindle motor and the actuator of a HDD due to positioning and free fall
G. H. Jang, S. J. Park, C. S. Kim and J. H. Han
811-816
Technical Paper
Air-bearing surface chemical modification for low-friction head–disk interface
Yuki Shimizu, Junguo Xu, Shozo Saegusa and Noritsugu Umehara
817-823
Technical Paper
Magnetic lithography for servowriting applications using flexible magnetic masks nanofabricated on plastic substrates
Z. Z. Bandić, T. R. Albrecht, C. Bonhote, J. Katine and Y. Hsu, et al.
825-829
Technical Paper
Piezoelectric unimorph miroactuators with X-shaped structure composed of PZT thin films
Isaku Kanno, Yoshiro Tazawa, Takaaki Suzuki and Hidetoshi Kotera
831-835
Technical Paper
Nonlinear controller design for a magnetic levitation device
Ehsan Shameli, Mir Behrad Khamesee and Jan Paul Huissoon
837-847
Technical Paper
Finite element modal analysis of an HDD considering the flexibility of spinning disk–spindle, head–suspension–actuator and supporting structure
G. H. Jang, C. H. Seo and Ho Seong Lee
849-857
Technical Paper
HDD seeking acoustics analysis by a transfer function approach
Fu-Ying Huang, Satoshi Yamamoto, Eric Baugh and Tetsuo Semba
859-865
Technical Paper
Numerical simulation of molecularly thin lubricant film flow due to the air bearing slider in hard disk drives
Hiroyuki Kubotera and David B. Bogy
867-872
Technical Paper
Out-of-plane motion of 260-nm thick guided-mode resonant grating filter controlled by four micro-thermal actuators
Yoshiaki Kanamori, Takashi Kitani and Kazuhiro Hane
873-881
Technical Paper
Nano-motion actuator with large working distance for precise track following
Shigeki Mori, Masato Furuya, Akihiro Naganawa, Yotsugi Shibuya and Goro Obinata, et al.
883-890
Technical Paper
Development of an underwater biomimetic microrobot with compact structure and flexible locomotion
Wei Zhang, Shuxiang Guo and Kinji Asaka
891-894
Technical Paper
Reliability assessment for particle-induced failures in multi-generation hard disk drives
Loon-Ching Tang, Quock Y. Ng, Wee-Tat Cheong and Jing-Shi Goh
895-904
Technical Paper
Measurement of spreading characteristics of molecularly thin lubricant films over grooved solid surfaces based on diffraction simulations
H. Zhang, Y. Mitsuya, M. Yamada and K. Fukuzawa
905-910
Technical Paper
A fingertip guiding manipulator for mental image creation of multi-stroke drawings
Yoshihiko Nomura, Yuki Yagi, Tokuhiro Sugiura, Hirokazu Matsui and Norihiko Kato
911-921
Technical Paper
Enhanced disturbance suppression in sampled-data systems and its application to high density data storage servos
Chee Khiang Pang, Guoxiao Guo, Ben M. Chen and Tong Heng Lee
923-931
Technical Paper
Numerical simulation and PIV measurement of the flow-field in optical disc drives
Nobuyuki Isoshima, Takayuki Fujimoto, Yukinobu Abe, Masatoshi Watanabe and Yoshiaki Yamauchi
933-941
Technical Paper
Prediction model of paper-web wrinkling and some numerical calculation examples with experimental verifications
H. Hashimoto
943-949
Technical Paper
Numerical ball swaging analysis of head arm for hard disk drives
Kenichiro Aoki and Keiji Aruga
951-958
Technical Paper
Micro cell encapsulation and its hydrogel-beads production using microfluidic device
Hirofumi Shintaku, Takeo Kuwabara, Satoyuki Kawano, Takaaki Suzuki and Isaku Kanno, et al.
959-964
Technical Paper
Skew simulation of a paper transferred by rubber rollers in printers
Shigeo Yanabe and Tetsuya Maeda
965-971
Technical Paper
Prediction of slippage onset condition between web and steel roller
Hiromu Hashimoto, Yasuhiro Ibi, Shigeyoshi Kiribe and Chihiro Kondou
973-979
Technical Paper
Measuring and reducing axial motion of flat belt by finite element analysis
Hui Cheng, Kazushi Yoshida and Shigeo Yanabe
981-986
Technical Paper
Numerical simulation of effect of roughness/texture of slider surface on intermolecular force
Jianhua Li, Junguo Xu and Yuki Shimizu
987-997
Technical Paper
Friction and wear of spindle motor hydrodynamic bearings for information storage systems during startup and shutdown
Ming Feng and Takashi Kenjo
999-1003
Technical Paper
Reduction in total surface area by the develpment of microdroplets during dewetting
T. Kato, S. Ohno and M. Kawaguchi
1005-1013
Technical Paper
Development of a sensor system for collecting tactile information
Yoshihiro Tanaka, Mami Tanaka and Seiji Chonan
1015-1021
Technical Paper
Microdrive operational and non-operational shock and vibration testing
Bert Feliss, Aravind N. Murthy and Frank E. Talke
1023-1030
Technical Paper
Simulation of the head disk interface for discrete track media
Maik Duwensee, Shoji Suzuki, Judy Lin, David Wachenschwanz and Frank E. Talke
1031-1038
Technical Paper
Dynamic response of 1-in. form factor disk drives to external shock and vibration loads
Aravind N. Murthy, Mathias Pfabe, Jianfeng Xu and Frank E. Talke
1039-1045
Technical Paper
Shock response analysis of hard disk drive using flexible multibody dynamics formulation
Mengjun Liu, Fook Fah Yap and Hendri Harmoko
1047-1053
Technical Paper
Self-assembly of three dimensional micro mechanisms using thermal shrinkage of polyimide
Kenji Suzuki, Hideaki Yamada, Hirofumi Miura and Hideaki Takanobu
1055-1062
Technical Paper
Aerodynamic stabilization of a flexible optical disk with an asymmetrically and triangularly arranged stabilizer
Yasutomo Aman, Nobuaki Onagi and Keisuke Uchida
1063-1075
Technical Paper
Adaptive nonstationary positioning control of vibration systems by means of solutions of time-varying Riccati equations
Susumu Hara
1077-1084
Technical Paper
Readout characteristics of a non-circular aperture mounted on an optical head slider flying above a medium having sub-100-nm-long patterns
Toshifumi Ohkubo, Majung Park, Masakazu Hirata, Manabu Oumi and Kunio Nakajima, et al.
1085-1092
Technical Paper
Improvement of component mode synthesis model for vibration analysis of hard disk drives using attachment modes
Takehiko Eguchi
1093-1101
Technical Paper
VCM design with round coil and axe-shaped magnet for hard disk drive actuator
Kenji Suzuki, Shingo Tsuda, Takaaki Deguchi and Toshihiko Shimizu
1103-1106
Technical Paper
Hard disk drive seek-arrival vibration reduction with parametric damped flexible printed circuits
Jen-Yuan (James) Chang
1107-1115
Technical Paper
Effect of shock pulse width on the shock response of small form factor disk drives
Puneet Bhargava and David B. Bogy
1117-1121
Technical Paper
Design of optical pickups by combining structural analysis and ray tracing
Tatsuro Ide, Kazuyuki Fukuda, Manabu Ochi and Kunikazu Ohnishi
1123-1130
Technical Paper
A method of reducing the windage power loss in a laser scanner motor using spiral-groove aerodynamic thrust bearings functioning as a viscous vacuum pump
Shigeka Yoshimoto, Masaaki Miyatake, Tomoatsu Iwasa and Akiyoshi Takahashi
1131-1139
Technical Paper
A circular arc slider with a high flying height supported by parallel flat springs for optical disc devices
Jun Tominaga, Takashi Watabe and Shigeka Yoshimoto
1141-1151
Technical Paper
Dynamic analysis of flexible media by dynamic elastica theory with aerodynamic effect
Sung-Kwon Hong, Jung-Geun Jee, Yong Hoon Jang, No-Cheol Park and Young-Pil Park
1153-1160
Technical Paper
Suggest a format for intelligence control and structure of holographic data storage system
Jang Hyun Kim, Sang-hoon Kim, Hyunseok Yang, Jin Bae Park and Young-Pil Park
1161-1167
Technical Paper
Traction force between rotating rolls and moving web considering the effect of air-entrainment
Masashi Sasaki, Kazukiyo Kohno, Koshi Tanimoto, Sadamu Takahashi and Setsuo Suzuki, et al.
1169-1174
Technical Paper
Dynamic conformations of fluorocarbon molecules on magnetic hard disk surfaces with charged sites
Kentaro Tanaka, Katsumi Iwamoto and Takahisa Kato
1175-1184
Technical Paper
An intermediate-layer lithography method for generating multiple microstructures made of different conducting polymers
Anirban Chakraborty, Xinchuan Liu, Ganga Parthasarathi and Cheng Luo
1185-1191
Technical Paper
Ultra sensitive in-situ acoustic characterization system for HDD head disc interface defectoscopy
Antanas Daugela, Subra Nagarajan and Zine E. Boutaghou
1193-1200
Technical Paper
New type motor for tough hard disk drive
K. Matsuoka, S. Obata, H. Kita, K. Miyamori and H. Noda, et al.
1201-1209
Technical Paper
Numerical analysis of off-track vibration of head gimbal assembly in hard disk drive caused by the airflow
Mohammad Kazemi
1211-1217
Technical Paper
Intermolecular force and surface roughness models for air bearing simulations for sub-5 nm flying height sliders
Du Chen and David B. Bogy
1219-1225
Technical Paper
Nanofabrication of solid surface using probe oxidation
Kenji Fukuzawa, Takanori Deguchi, Takuro Muramatsu, Hedong Zhang and Yasunaga Mitsuya
1227-1239
Technical Paper
Nonplanar modeling and experimental validation of a spindle–disk system equipped with an automatic balancer system in optical disk drives
Paul C.-P. Chao, Cheng-Kuo Sung, Szu-Tuo Wu and Jeng-Sheng Huang
1241-1252
Technical Paper
Dynamical modeling and experimental validation of a micro-speaker with corrugated diaphragm for mobile phones
Paul C.-P. Chao and I-Ting Wang
1253-1260
Technical Paper
High-performance optical pick-up actuator with singlet objective lens for BD/DVD/CD compatible drive
Byung Youn Song, Young Bin Lee, Dae Jong Jang, Jong Kook Lee and Junghoon Lee
1261-1269
Technical Paper
A robust adaptive feedforward method for the compensation of harmonic disturbances
Dongho Oh, J. C. Koo and Sangmin Suh
1271-1279
Technical Paper
An alternative to CFD: piecewise linear models for frequency spectra of flow induced drag in hard disk drives
Sujit Kirpekar and David B. Bogy
1281-1287
Technical Paper
On investigation of vibro-acoustics of FDB spindle motors for hard disk drives
Nopdanai Ajavakom, Thitima Jintanawan, Pairod Singhatanadgid and Paiboon Sripakagorn
1289-1295
Technical Paper
Thickness tolerance compensation of SIL first surface near-field recording with replicated lens on SIL
Yong-Joong Yoon, Hyun Choi, Wan-Chin Kim, TaeSun Song and No-Cheol Park
1297-1306
Technical Paper
Aerodynamic characteristics of carriage arm equipped on hard magnetic disks
Shigehiko Kaneko, Takashi Nishihara and Tatsuo Watanabe
1307-1313
Technical Paper
Design of swing arm actuator for small and slim optical disc drives
Dong-Ju Lee, Je-Seung Oh, Sa-Ung Kim, Jeong-Hoon Yoo and No-Cheol Park, et al.
1315-1324
Technical Paper
Development of symmetric type slim optical pickup actuator for flexible disk system
Dong-Ju Lee, Choong Kim, Myeong-Gyu Song, Jung-Hyun Woo and No-Cheol Park, et al.
1325-1330
Technical Paper
Effect of belt transport speed and other factors on belt mistracking
Yuko Kobayashi and Kiminori Toya
1331-1338
Technical Paper
A more efficient approach for investigation of effect of various HDD components on the shock tolerance
Hendri Harmoko, Fook Fah Yap, Nader Vahdati, Samuel Gan and Mengjun Liu, et al.
1339-1345
Technical Paper
Linearized analysis of the deformation of ultra-thin lubricant films under gas pressures by the long wave equation
Shigehisa Fukui, Soichi Shimizu, Kiyomi Yamane and Hiroshige Matsuoka
1347-1352
Technical Paper
Development of inertia driven micro robot with nano tilting stage for SEM operation
Yoshihiro Nomura and Hisayuki Aoyama
1353-1358
Technical Paper
Deposition of Si-DLC film and its microstructural, tribological and corrosion properties
Junho Choi, Masahiro Kawaguchi, Takahisa Kato and Masami Ikeyama
1359-1369
Technical Paper
A new DNA chip detection mechanism using optical pick-up actuators
Kyung-Ho Kim, Seung-Yop Lee, Sookyung Kim, Seung-Hwan Lee and Seong-Gab Jeong
1371-1375
Technical Paper
Dynamics of ultra low flying sliders during contact with a lubricated disk
Jianfeng Xu, James D. Kiely, Yiao-Tee Hsia and Frank E. Talke
1377-1382
Technical Paper
Bias in hard disk drive rotary actuator pivot bearings: measurements and lubrication phenomena
Daniel Helmick, William Messner and C. Fred Higgs
1383-1389
Technical Paper
Servo-write quality and servo performance in perpendicular recording
Kyo Akagi and Takehiko Hamaguchi
1391-1396
Technical Paper
Development of a micro biochip integrated traveling wave micropumps and surface plasmon resonance imaging sensors
Takaaki Suzuki, Yuji Teramura, Hidetoshi Hata, Koki Inokuma and Isaku Kanno, et al.
1397-1402
Technical Paper
Real time servo control of the holographic data storage system with an additional servo beam
Junho Yang, Sang-Hoon Kim, Jang Hyun Kim, Hyunseok Yang and Joo-Youn Park, et al.
1403-1410
Technical Paper
Angle compensation of the reference beam in a retrieving process of the holographic data storage system
Sang-Hoon Kim, Jang Hyun Kim, Junho Yang, Hyunseok Yang and Joo-Youn Park, et al.
1411-1416
Technical Paper
Polymer microstructure generated by laser stereo-lithography and its transfer to silicon substrate using reactive ion etching
Yoshiaki Kanamori, Junya Sato, Takeshi Shimano, Shigeo Nakamura and Kazuhiro Hane
1417-1424
Technical Paper
New type latch for hard disk drive
H. Kuwajima, Y. Ueno, M. Umeda, T. Inaji and A. Ochi, et al.
1425-1430
Technical Paper
Color registration error reduction method compensating the influence of belt thickness variation in electrophotographic process
Hiromichi Matsuda, Toshiyuki Andoh and Hiroshi Koide
1431-1437
Technical Paper
Vacuum vapor deposition of PFPE molecules on CHxNy and CHxFy amorphous carbon surfaces
Masahiro Kawaguchi, Junho Choi and Takahisa Kato
1439-1447
Technical Paper
Frequency domain subspace identification of a tape servo system
Michel Claes, Matthew R. Graham and Raymond A. de Callafon