1089-1097
Technical Paper
All-plastic distributed pressure sensors: taylor-made performance by electroactive materials design
Estibalitz Ochoteco, Jose A. Pomposo, Tomasz Sikora, Fernando Vidal and Fernando Martinez, et al.
1099-1110
Technical Paper
Ultra high aspect-ratio MEMS and NEMS on basis of fibrous composite technology
Sergey Sukhoveyev
1111-1115
Technical Paper
Pulsed electrodeposition of high aspect-ratio NiFe assemblies and its influence on spatial alloy composition
F. Giro, K. Bedner, C. Dhum, J. E. Hoffmann and S. P. Heussler, et al.
1117-1123
Technical Paper
Thermal and flow analysis of two-dimensional fully developed flow in an AC magneto-hydrodynamic micropump
Mustafa Abdullah and Hamzeh M. Duwairi
1125-1135
Technical Paper
Fabrication of microfluidic channel utilizing silicone rubber with vacuum casting
S. C. H. Thian, J. Y. H. Fuh, Y. S. Wong, H. T. Loh and P. W. Gian, et al.
1137-1142
Technical Paper
Characterization of polymer inks for drop-on-demand printing systems
Ronald M. Meixner, Dominik Cibis, Klaus Krueger and Holger Goebel
1143-1148
Technical Paper
Development of a novel protective cover for micro manipulation process in the SEM chamber
Al. Cvetanovic, An. Cvetanovic, D. Andrijasevic, I. Giouroudi and W. Brenner
1149-1155
Technical Paper
Replication of nanostructures on microstructures by intermediate film mold inserted hot embossing process
Hyun Sup Lee, Tai Hun Kwon, Jong Hyun Kim and Suk Sang Chang
1157-1163
Technical Paper
Dimple-flexure contact stiffness effect on operational hard disk drive shock tolerance
Mengjun Liu, Fook Fah Yap and Hendri Harmoko
1165-1171
Technical Paper
Structural, morphological and microhardness characterization in polymer complex of laser dye rhodamine (Rh6G) doped polymethyl methacrylate
Pradeep Kumar Dubey, R. Bajpai and J. M. Keller
1173-1183
Technical Paper
Distributed transmission line phase shifter using MEMS switches and inductors
Saeid Afrang and Burhanuddin Yeop Majlis
1185-1191
Technical Paper
A novel method to fabricate single crystal nano beams with (111)-oriented Si micromachining
Heng Yang, Kefeng Xu, Yongliang Yang, Tie Li and Jiwei Jiao, et al.
1193-1203
Technical Paper
Evaluation of electron beam welding technique for the integration of robust sensor elements into high-pressure automotive systems
U. Schmid, D. Schmitt-Landsiedel and G. Krötz
1205-1214
Technical Paper
Low-stress fabrication of 3D polymer free standing structures using lamination of photosensitive films
Patrick Abgrall, Samuel Charlot, Remy Fulcrand, Lefillastre Paul and Ali Boukabache, et al.