417-437
Fluid flows in metallurgy—Friend or foe?
Roderick I. L. Guthrie
439-448
Kinetics of chlorination of tantalum pentoxide in mixture with sucrose carbon by chlorine gas
M. Del C. Ruiz, J. A. González and J. B. Rivarola
449-460
Mathematical simulation and physical modeling of unsteady fluid flows in a water model of a slab mold
A. Ramos-Banderas, R. Sánchez-Pérez, L. Demedices-García, J. Palafox-Ramos and M. Díaz-Cruz, et al.
461-469
Thermal diffusivity measurements of some synthetic CaO-Al2O3-SiO2 slags
Robert Eriksson and Seshadri Seetharaman
471-486
On different modifications of the capillary model of penetration of inert liquid metals into porous refractories and their connection to the pore size distribution of the refractories
George Kaptay, Taishi Matsushita, Kusuhiro Mukai and Tatsuya Ohuchi
487-492
Vapor pressure measurement of zn-fe intermetallic compounds
Kazuaki Mita, Shu Yamaguchi and Masafumi Maeda
493-507
A thermodynamic model for deoxidation equilibria in steel
In-Ho Jung, Sergei A. Decterov and Arthur D. Pelton
509-515
Modeling the dependence of alumina solubility on temperature and melt composition in cryolite-based melts
Yunshu Zhang and Robert A. Rapp
517-522
Microreaction mechanism in reduction of magnetite to wustite
Xingmin Guo, Yasushi Sasaki, Yoshiaki Kashiwaya and Kuniyoshi Ishii
523-540
On the development of a three-dimensional transient thermal model to predict ingot cooling behavior during the start-up phase of the direct chill-casting process for an AA5182 aluminum alloy ingot
J. Sengupta, S. L. Cockcroft, D. M. Maijer, M. A. Wells and A. Larouche
541-560
Analysis of thin-slab casting by the compact-strip process: Part I. Heat extraction and solidification
J. E. Camporredondo S., A. H. Castillejos E., F. A. Acosta G., E. P. Gutiérrez M. and M. A. Herrera G.
561-573
Analysis of thin-slab casting by the compact-strip process: Part II. Effect of operating and design parameters on solidification and bulging
J. E. Camporredondo S., F. A. Acosta G., A. H. Castillejos E., E. P. Gutiérrez M. and R. González de la P.
575-585
Estimation of multiple heat-flux components at the metal/mold interface in bar and plate aluminum alloy castings
T. S. Prasanna Kumar and H. C. Kamath
587-597
Precise determination of the activation energy for desorption of hydrogen in two Ti-added steels by a single thermal-desorption spectrum
F. G. Wei, T. Hara and K. Tsuzaki