609-615
Solid-state reduction of chromium oxide by methane-containing gas
Nathaniel Anacleto and Oleg Ostrovski
617-623
Mechanism and rate of reaction of Al2O, Al, and CO vapors with carbon
R. J. Fruehan, Y. Li and Gerald Carkin
625-631
Condensation of zinc vapor on solid media in Zn(
g
)-CO-CO2-Ar mixtures
N. X. Fu, T. Tamagawa, M. Kobayashi and M. Tanaka
633-642
Experimental study of phase equilibria in the Al-Fe-Zn-O system in air
Robert Hansson, Peter C. Hayes and Evgueni Jak
643-650
Additions to generate foam in stainless steelmaking
R. J. Fruehan and J. J. Kerr
651-661
Kinetics of As, Sb, Bi and Pb volatilization from industrial copper matte during Ar+O2 bubbling
H. S. Sohn, Y. Fukunaka, T. Oishi, H. Y. Sohn and Z. Asaki
663-674
Continuous oxygen steelmaking with copper-, tin-, and zinc-contaminated scrap
N. A. Warner
675-684
Multicomponent diffusion in molten slags
M. D. Dolan and R. F. Johnston
685-702
Study of transient flow and particle transport in continuous steel caster molds: Part I. Fluid flow
Quan Yuan, Brian G. Thomas and S. P. Vanka
703-714
Study of transient flow and particle transport in continuous steel caster molds: Part II. Particle transport
Quan Yuan, Brian G. Thomas and S. P. Vanka
715-720
Calculation of physicochemical properties in a ternary system with miscibility gap
Kuo-Chih Chou, Xiangmei Zhong and Kuangdi Xu
721-733
A model of the interfacial heat-transfer coefficient for the aluminum gravity die-casting process
C. P. Hallam and W. D. Griffiths
735-742
Response of primary dendrite spacing to varying temperature gradient during directional solidification
Dexin Ma
743-754
Channel segregation during solidification and the effects of an alternating traveling magnetic field
M. Medina, Y. Du Terrail, F. Durand and Y. Fautrelle
755-759
Simulation of die filling for the wax injection process: Part I. Models for material behavior
J. -C. Gebelin, M. R. Jolly, A. M. Cendrowicz, S. Blackburn and J. Cirre
761-768
Simulation of die filling for the wax injection process: Part II. Numerical simulation
J. -C. Gebelin, M. R. Jolly, A. M. Cendrowicz, S. Blackburn and J. Cirre
769-776
Fabrication of foamable precursors by powder compression and induction heating process
S. W. Youn and C. G. Kang
777-783
Characterization of plastic flow and resulting microtextures in a friction stir weld
J. A. Schneider and A. C. Nunes
785-803
The development and experimental validation of a numerical model of an induction skull melting furnace
V. Bojarevics, K. Pericleous, R. A. Harding and M. Wickins
805-809
Communications
A computational assessment of viscosity measurement in rotating viscometers through detailed numerical simulation
M. Madan and D. Mazumdar